On September 19, the lifting operation for the alumina transportation truss section that spans across the factory buildings in the Shanxi Zhaofeng electrolytic aluminum project, carried out by Yunnan JianTou Machinery Manufacturing and Installation Engineering Co., Ltd., was completed successfully – the components were placed in position smoothly and accurately. The truss in question is 36.64 meters high, has a span of 45 meters, a lifting radius of 38 meters, and the lifting operation took place at a height of 53.6 meters; the weight of each component was 33 tons. Facing challenges such as a large overall span, large dimensions of the components, and complex conditions at the construction site, the project team planned ahead, organized the work scientifically, and established a specialized technical team to address these issues. Taking into account the actual conditions on site, they repeatedly refined the lifting plan, conducted multiple rounds of optimization, and sought expert opinions to ensure a solid technical foundation for the lifting operation. During the lifting process, dedicated personnel were assigned to oversee the operation, ensuring safety throughout the whole process, and strict control was exercised over key steps such as lifting, hovering, moving, aligning, and lowering the components. At the same time, wind speeds at high altitudes, the operating status of the lifting equipment, and the posture of the truss components were monitored in real time, allowing for adjustments to the lifting parameters as needed, thus ensuring the successful completion of the operation. Going forward, the Shanxi Zhaofeng project team will continue to adhere to high standards and strict requirements, focusing on construction quality and safety, and making every effort to advance the overall progress of the project.
The lifting operation of the alumina transportation truss section across the factory building in Shanxi Zhaofeng aluminum electrolysis project was completed successfully.